Duration: one hour or less
Distance covered: about one mile
Forms of transportation required: Trimet*, Portland Streetcar*, walking/rolling
Area focus: Central west-side Portland, OR
Theme: Accessibility in public transport
*This will cost approximately $1.25-$5.00 depending on the speed of completion, if you are eligible for Trimet's reduced fare program, and/or are a Portland State University student. Details can be found here: Trimet (Hop Fastpass) fares, Portland Streetcar fares. PSU students may ride Portland Streetcar for free with proof of enrollment (PSU ID card).
Answers are included after each question in a drop-down section.
Head to the Portland State University Urban Center to begin your hunt.
This item is located on the bus stop sign, providing two more formats of the information located slightly above it.
Snap a photo of this, and decide how useful it is considering its placement.
Raised lettering and braille signage attached to the bus stop post at SW 6th & Mill.
Wait for a bus to arrive at this same location. When the bus arrives and the doors open, what happens to the front end of the bus?
Hint: this causes the bus to beep or chirp loudly while it is operating.
Take a short video of this happening.
The bus "kneels" to allow passengers to board easier, without having to step much higher off the curb.
These tactile installations help people who use canes avoid the danger of this high curb cut for the streetcar.
Once you've found it, snap a photo, move onto item three and wait for the next streetcar to come
The tactile strip on both sides of the streetcar alignment where the tracks dip below the sidewalk to allow for level-boarding.
This identifies the destination of the streetcar for those who may not be able to visually tell.
You may not have time, but try to record audio when the streetcar arrives and the doors open while you board the streetcar.
This item is tricky, as sometimes it's missing. If you do not "find" it because it is missing, this is still a valid solution.
Audible route/destination announcements.
This button acts like the typical stop request strip, but is lower for those who may not be able to reach the higher strips and requests an additional boarding/alighting accommodation.
Snap a photo and press it when the next stop is Central Library, (SW 10th and Yamhill).
Blue ADA ramp & stop request button in the priority seating / wheelchair area.
If you found and pressed item four, this is what deployed from the streetcar to allow for users with a mobility device to enter and exit the streetcar.
As you alight from the streetcar, try and take a photo of it, then walk towards Pioneer Square.
ADA bridge-plate.
Offering instructions in three formats, you can purchase a fare here.
Identify the three formats, and take a photo.
English, Spanish, and Braille.
This button on a pole next to item six offers an adapted version of the live arrivals info and service announcements to those who cannot read them on the screen above.
Press this button and take a photo of it, or record some audio of what happens after it's pressed.
Audible arrival and service alert announcements by request.
These seats nearby items six and seven are an obvious example of hostile design.
Snap a photo of this station "amenity"
Two separated seats with arm rests that prevent someone from using this "bench" as anything but something to sit on.